CCNA 1 v6.0 Chapter 7 Quiz Answers 2019

By | 20 February, 2019

CCNA 1 v6.0 Chapter 7 Quiz Answers Cisco Last Update 2019

1. Match each description with an appropriate IP address. (Not all options are used.)

a link-local address            ——-> 169.254.1.5
a public address                  ——-> 198.133.219.2
an experimental address  ——-> 240.2.6.255
a loopback address            ——-> 127.0.0.1

Explanation:
Link-Local addresses are assigned automatically by the OS and are located in the block 169.254.0.0/16. The private address ranges are 10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16. The addresses in the block 240.0.0.0 to 255.255.255.254 are reserved as experimental addresses. Loopback addresses belong to the block 127.0.0.0/8.

2. Match the IPv6 address with the IPv6 address type. (Not all options are used.)

2001:DB8::BAF:3F57:FE94   ——> global unicast
FF02::1                                       ——> all node multicast
::1                                                 ——> loopback
FF02::1:FFAE:F85F                ——> solicited node multicast

Explanation:
FF02::1:FFAE:F85F is a solicited node multicast address.
2001:DB8::BAF:3F57:FE94 is a global unicast address.
FF02::1 is the all node multicast address. Packets sent to this address will be received by all IPv6 hosts on the local link.
::1 is the IPv6 loopback address.
There are no examples of link local or unique local addresses provided.

3. Which two types of devices are typically assigned static IP addresses? (Choose two.)

workstations
web servers*
printers*
hubs
laptops

Explanation:
Servers and peripherals are often accessed by an IP address, so these devices need predictable IP addresses. End-user devices often have dynamic addresses that are assigned. Hubs do not require IPv4 addresses to operate as intermediary devices.

4. Fill in the blank.

The 8-digit binary value of the last octet of the IPv4 address 172.17.10.7 is      __00000111__      .

Explanation:
7 = 4 + 2 + 1 = 00000111

5. In which alternative to DHCPv6 does a router dynamically provide IPv6 configuration information to hosts?

ARP
EUI-64
ICMPv6
SLAAC*

Explanation:
Stateless Address Autoconfiguration (SLAAC) can be used as an alternative to DHCPv6. In this approach, a router provides global routing prefix, prefix length, default gateway, and DNS server information to a host. The host is not provided with a global unicast address by SLAAC. Instead, SLAAC suggests that the host create its own global unicast address based on the supplied global routing prefix. ARP is not used in IPv6. ICMPv6 messages are used by SLAAC to provide addressing and other configuration information. EUI-64 is a process in which a host will create an Interface ID from its 48-bit MAC address.

6. Fill in the blank.

The last host address on the 10.15.25.0/24 network is __10.15.25.254__       .

Explanation:
The host portion of the last host address will contain all 1 bits with a 0 bit for the lowest order or rightmost bit. This address is always one less than the broadcast address. The range of addresses for the network 10.15.25.0/24 is 10.15.25.0 (network address) through 10.15.25.255 (broadcast address). So the last host address for this network is 10.15.25.254.

Noted: There are 4 possible answers. You can fill in one of the following in netacad: 10.15.25.254, .254, 254, and 10.15.25.254/24.

7. What is the prefix length notation for the subnet mask 255.255.255.224?

/25
/26
/27*
/28

Explanation:
The binary format for 255.255.255.224 is 11111111.11111111.11111111.11100000. The prefix length is the number of consecutive 1s in the subnet mask. Therefore, the prefix length is /27.

8. Match the description to the IPv6 addressing component. (Not all options are used.)

This part of the address is used by an organization to identify subnets.  ——> subnet ID
This network portion of the address is assigned by the provider.  ——> global routing prefix
This part of the address is the equivalent to the host portion of an IPv4 address.  ——> interface ID

Explanation:
A global IPv6 unicast address contains three parts. The Global Routing Prefix of an IPv6 is the prefix or network portion of the address assigned by the provider, such as an ISP, to a customer or site. The Subnet ID Field is used by an organization to identify a subnet within its site. The interface ID field of the IPv6 Interface ID is equivalent to the host portion of an IPv4 address.

9. Which network migration technique encapsulates IPv6 packets inside IPv4 packets to carry them over IPv4 network infrastructures?

encapsulation
translation
dual-stack
tunneling*

Explanation:
The tunneling migration technique encapsulates an IPv6 packet inside an IPv4 packet. Encapsulation assembles a message and adds information to each layer in order to transmit the data over the network. Translation is a migration technique that allows IPv6-enabled devices to communicate with IPv4-enabled devices using a translation technique similar to NAT for IPv4. The dual-stack migration technique allows IPv4 and IPv6 protocol stacks to coexist on the same network simultaneously.

10. Fill in the blank.

The network portion of the address 172.16.30.5/16 is    __172.16__         .

Explanation:
A prefix of /16 means that 16 bits are used for the network part of the address. The network portion of the address is therefore 172.16.

11. Fill in the blank.

The shortest compressed format of the IPv6 address 2001:0DB8:0000:1470:0000:0000:0000:0200 is ___2001:DB8:0:1470::200__

Explanation:
A double colon (::) can replace any single, contiguous string of one or more 16-bit segments (hextets) consisting of all 0s, and can only be used once per IPv6 address. Any leading 0s (zeros) in any 16-bit section or hextet can be omitted.

Noted: There are 2 possible answers. You can fill in one of the following in netacad: 2001:DB8:0:1470::200, and 2001:db8:0:1470::200.

12. An IPv6 enabled device sends a data packet with the destination address of FF02::1. What is the target of this packet?​

the one IPv6 device on the link that has been uniquely configured with this address
all IPv6 enabled devices on the local link​ or network*
only IPv6 DHCP servers​
only IPv6 configured routers

Explanation:
This address is one of the assigned IPv6 multicast addresses. Packets addressed to FF02::1 are for all IPv6 enabled devices on the link or network. FF02::2 is for all IPv6 routers that exist on the network.

13. Which type of IPv6 address is not routable and used only for communication on a single subnet?

global unicast address
link-local address*
loopback address
unique local address
unspecified address

Explanation:
Link-local addresses have relevance only on the local link. Routers will not forward packets that include a link-local address as either the source or destination address.

14. A user who is unable to connect to the file server contacts the help desk. The helpdesk technician asks the user to ping the IP address of the default gateway that is configured on the workstation. What is the purpose for this ping command?

to obtain a dynamic IP address from the server
to request that gateway forward the connection request to the file server
to test that the host has the capability to reach hosts on other networks*
to resolve the domain name of the file server to its IP address

Explanation:
The ping command is used to test connectivity between hosts. The other options describe tasks not performed by ping. Pinging the default gateway will test whether the host has the capability to reach hosts on its own network and on other networks.

Leave a Reply

Your email address will not be published. Required fields are marked *